Custom Made Electrical Boxes for Contractors and Facility Management.
Boxes for electrical wiring, underground power and other purposes.

ask us anything electrical!

Electrical Supply online support services for: Costs, sizes, types, availability, references, or any electrical questions, send us an email and we'll write back with a fast response.

Need Special Boxes? Yes, we are Able to Make it.

When it comes to electrical boxes,
we either got them, or can get them to you the next day in most cases.
Ask the Experts about what you need:
Custom made electrical boxes and enclosures, explosion proof boxes, in-ground boxes, control boxes, circuit breaker boxes, switch and outlet boxes by Able Group Inc.
The National Electrical Code, lighting boxes for high pressure sodium and medal halide. Electrical supplies and NEMA enclosures, custom made, J-box, PVC boxes, new work, molded case, explosion proof, interchangeable, distributor, wire, cable, connection box, screw cover box, cast iron and code required sizes.

... For Information, Costs and Details - Just Ask Us.
Electrical safety inspections main lug panel, cadmium connectors, MC wire, SER cable, SEU cable, twist-lock Philadelphia, PA, receptacle charts, wiring diagrams, GFI, receptacles, grounding rods, Commercial, Industrial, cadmium connectors, MC wire, SER cable, SEU cable, twist-lock, grounding, We are installers.  The National Electrical Manufacturers Association, NEMA.

Wide range of circuit breakers and mounting hardware from a variety of manufacturers. Manufacturer products we stock include Cutler Hammer, American, General Electric, Thomas & Betts, Siemens, Murray, Square D, Wadsworth and Zinsco
From a licensed electrician in Delaware County and Philadelphia, PA.

  Notes about CT Cabinets:

The customer provides and installs a cabinet for the current transformers, and the conduit between the CT cabinet and the meter enclosure.
The CT cabinet is metal, weather tight (if located outside), NEMA 3R rated, and securely mounted on a rigid surface plumb in both directions.
The cabinet is to have a side-hinged, sealable door. When open, the door must not block a safe exit.
The top of the cabinet must be no higher than 7 feet above the floor, and the bottom of the cabinet must be at least 6 inches above the floor.
The dimensions of the CT cabinet are: Single-phase, 400-800 amps 30" X 48" X 11"
Three phase, 200-800 amps 36" X 48" X 11"
Over 800 amps Requires switchboard metering. The location of the CT cabinet is subject to the approval of the power company.
Inside the cabinet, the customer installs a mounting base for the CTs.
A single-phase mounting base is used if the service is single-phase, a three-phase mounting base is used if the service is three-phase.
The base has two cable termination bolts on the line and the load side of each phase, and two bolts on the neutral bus.
The CT cabinet contains only the main service conductors.
A maximum of four main service conductors may be served from the load side of each termination bolt, as long as the lugs are not stacked and do not restrict
mounting the CTs. Use "stair step" lugs if more than two conductors are terminated at a CT.
If the CT cabinet is installed in a vehicle traffic area, install a guard post.
Meter Socket, Enclosure, and Conduit The distance between the meter socket enclosure and the CT cabinet is not less than 10 inches and not more than 50 feet.
Mount the two enclosures as close together as feasible. Meter Socket and Enclosure for Single-Phase Circuits. We will recommend the size of the CT cabinet for you.

Circuit Breakers such as: Challenger,  Crouse-Hinds, Cutler-Hammer,  Federal Pacific (FPE),  Fuji (call),  General Electric,  Murray Siemens / ITE / Gould,  Square D,  Thomas & Betts,  Wadsworth,  Westinghouse,  Zinsco, Transformers,  Switches & Disconnects,  All NEMA Enclosures,  ASCO,  Zinsco,  Sylvania,  Switchboards & Switchgear,  Breaker Accessories, Motor Controls, Allen Bradley,  Joslyn Clark,  Furnas. From GE, Murray, Bryant, Challenger, Square D, Cutler Hammer, FPE, Wadsworth, ITE Pushmatic, Thomas and Betts, and Zinsco. Also used, and obsolete. Outlet Boxes, Electrical Supplies:

Thomas & Betts 3G4DV1/2 3 Gang Electrical Box
3 gang 4x6 box Steel, 3-3/4 x 5-9/16 x 2-1/2 D. 47.8 cu. in.
Side mounted FM bracket Six 1/2 knockouts on top, two 1/2 knockouts on bottom. These mounting clips are the perfect way to mount electrical boxes, fire detectors and other devices on suspended ceiling grids and tees.
Thomas & Betts 721713/41 Square Electrical Box
Square Electrical BoxSteel, 4-11/16" x 4-11/16" x 2-1/8" D. 42 cu. in. Four 3/4" and four 1" knockouts on sides. Three 1/2" and two 3/4" knockouts.
Thomas & Betts B355R 3GANG Multi-Gang Outlet Boxes & Brackets 3 gang old work box The only 3 gang PVC old work box available Works well with large devices (GFC and dimmers), indoor remodeling.
Thomas & Betts 68P Electrical Floor Box Pvc floor box PVC, adjustable, 6 H. x 5-1/2 diameter Suggested for use in concrete floors Carlon B120R 20 Cubic inch Single Gang Old Work Box Old work box is 20 cubic inches for large wiring devices. Extra wire capacity.
PVC construction. General Electric U013P 110V Electrical Power Outlet Box, 30 Amp Protect your RV appliances and your comfort at the same time by installing a 30 Amp, 110V Electrical Outlet Box at your home.
Thomas & Betts 4G4DV1/2 4 Gang Electrical Box
4 Gang Electrical BoxSteel, 3-3/4" x 7-3/8" x 2-1/2" D. 63.5 cu. in. Side mounted FM bracket. Eight 1/2" knockouts on top, two 1/2" knockouts on. Thomas & Betts KE98GFCN Weatherproof Electrical Box Kit
Gfci kit Nonmetallic outlet kits come with outlet - cover and gasket - and box Nonconductive Easy-to-install UV stabilized material with Marine UL.
Greenfield Weatherproof Electrical Box While-In-Use Cover - Horizontal - Bronze, WIUHBRS
This while-in-use cover, is made from corrosion resistant, diecast zamak alloy. Its durable powdercoat finish.
floor boxes electrical electrical junction boxes waterproof electrical boxes outdoor electrical boxes weatherproof electrical boxes electrical outlet boxes steel city electrical boxes

Electrical Boxes for Fuel Station Control Panels.

Electrical Boxes and Control Panels for Refrigeration Equipment.

In Ground Electrical Boxes for Parking Lot Equipment and Control Systems.

Electrical Boxes Replaced due to Car and Truck Damages.

Electrical Boxes and Industrial Enclosures for Bolt-On Circuit Breakers.

Electrical Boxes for Floor Receptacles.

Receptacles, NEC Information Code Required Electrical Box.

Rough Wiring - Local Codes for Sizes and Types of Electrical Boxes.